Shell Scheme : Stands are provided in cubicles of a pre-fabricated system (Octanom), made of aluminum hardware profiles & laminated ply partitions with standard accessories
Sketch of 12 Sqm standard shell scheme stand with specifications
Synthetic needle punched carpet (inside the stand area)
White laminated wooden system partitions of 2.5mts height. (max. 3 sides)
Fascia board, 0.3mts height with 10cms height company name in white sticker
1 Table (Prefabricated System)
2 Chairs (Folding / PVC type)
1 Waste bin
4 nos. 100w Spotlights
1 Socket point – 5 / 15Amps (with 1KW power supply per 12m2)
Basic furniture entitlement for Shell Scheme Stands
Stand Area (Sqm)
12-23 Sqm
24–35 Sqm
36–47 Sqm
48–59 Sqm
60–71 Sqm
Prefabricated Table
1
2
3
4
5
Folding / PVC Chairs
2
4
6
8
10
Spotlights (100W)
4
8
12
16
20
5 / 15Amps Socket (including 1kW power per 12 Sqm)
1
2
3
4
5
Waste Basket
1
2
3
4
5
These items are not interchangeable. You may opt for all or part of the items listed.
Guidelines for exhibitors on the rental of wall panels:
The organisers recommend no additions or any change to the Standard Shell Scheme. Should you do wish to do so, please contact the operations staff of the official shell scheme contractor.
Do not spray, use glue or silicone on the stand panels.
Do not paint, spray-paint, or write on the stand panels.
Do not drill, nail, perforate, tack down, staple or cause any damage to the stand panels or any parts of the standard shell scheme stand. Should you need to affix any exhibit or sign to the stand panels, please contact the operations staff of the official shell scheme stand contractor.
For multiple stands, partitions in between the stands will not be provided, unless specifically requested.
Note: In case of violation of the above rules, the official shell scheme stand contractor will be obliged to request the payment from exhibitor for any damage caused at the rate of INR 2,500.00 per panel.
